Not all Holland blinds are the same to remove however, here at Diamonds Blinds it is very simple.

1. Roll the blind all the way up.
2. At the opposite end of the chain operation is a clear coloured wheel, this will turn only one way, turn this gently.
3. Make sure you support the blind with your other hand.
4. One the wheel has turned, the pin in the end of the blind will retract and, the blind will come away from the bracket at that end.
5. Remove the blind from the brackets.

To put it back up:

1. Make sure you keep the same orientation that the blind had originally
2. Check the side with the clear wheel and ensure the pin is out. If not, turn the wheel and the pin will pop out
3. Fit the side with the chain first. The covered part of the chain operation should be facing upwards. You may have to wiggle the blind a bit till it slots in.
4. Push the blind upwards, into position. The pin should go through the channel to the middle of the bracket
5. When you hear it click, the blind is secured.
6. You should have a smooth operation.